Berrys 99958 Superior .40 Cal/10mm 180 GR Flat Point Pistol Bullets - 250 Count Box

Berry's Superior .40 Cal/10mm 180 GR Flat Point pistol bullets give reloaders a cost-effective alternative to traditional jacketed ammunition without compromising on quality or barrel life. Each box contains 250 copper-plated bullets engineered for handgun cartridge reloading, whether you're loading for competition, training, or personal defense practice.

These bullets start as swaged cores, then receive a precise copper plating and are re-struck to ensure consistent weight and geometry. The flat point design provides reliable feeding and a predictable profile downrange. Because the projectiles are plated rather than bare lead, you get the cleanliness benefit of jacketed rounds—no lead fouling to worry about in your barrel or breech—at a fraction of the per-round cost of factory ammunition. That efficiency matters when you're running high-volume practice sessions or serious competition schedules.

The 180-grain weight works across both .40 S&W and 10mm platforms, making this a versatile choice if you reload for both cartridges. Keep in mind the SAAMI maximum overall length specs: .40 Col maxes out at 1.135", while 10mm runs to 1.250". These bullets are rated for velocities up to 1250 fps, which covers most standard handgun loads in both calibers. If you're already loading .40 or 10mm, this box of 250 gives you plenty of components for extended range time or reloading sessions without needing to restock every few hundred rounds.

Key Features

• Copper-plated construction prevents barrel fouling—cleaner shooting than bare lead
• Swaged and re-struck for consistent weight and concentricity across the box
• Flat point design for reliable feeding and consistent performance
• 250-count box reduces restock frequency for high-volume loaders
• Suitable for both .40 S&W and 10mm reloading applications
• Rated for velocities up to 1250 fps

Specifications

Frequently Asked Questions

Can I use these bullets for both .40 S&W and 10mm loads?

Yes, the 180-grain flat point design works in both cartridges. However, you must respect the different SAAMI maximum overall lengths: 1.135" for .40 and 1.250" for 10mm. Always set your reloading dies and measure finished rounds carefully for each caliber.

Will these plated bullets foul my barrel like cast lead does?

The copper plating significantly reduces barrel fouling compared to bare lead projectiles, giving you the cleanliness benefit of jacketed ammunition without the higher cost. You'll still want to maintain your firearm, but you won't encounter the lead buildup associated with cast rounds.

What's the maximum velocity I should load these to?

These bullets are rated for velocities up to 1250 fps. Most standard .40 S&W and 10mm loads fall comfortably within this range, but always cross-reference your reloading manual and work up loads conservatively from published minimums.

How many rounds can I reload from a 250-count box?

Each box contains 250 bullets, so you'll get 250 finished rounds (assuming you have adequate primers, powder, and cases). That translates to five 50-round boxes' worth of components.