Area419 ZERO Press Gen 2 with 7/8 Turret Head
$1,400.00
The Area419 ZERO Press Gen 2 with 7/8 Turret Head is a precision single-stage turret reloading press built for shooters who demand repeatability and smooth operation at the bench. This second-generation update refines an already-proven design, incorporating feedback from thousands of users worldwide while maintaining full compatibility with Gen 1 accessories. If you're loading rifle ammunition and want a press that feels as good as it performs, the ZERO Gen 2 is engineered to become your go-to tool for years of accurate, consistent reloading.
The mechanical heart of the ZERO Gen 2 is its custom-machined PTFE-lined bearing system, which guides a precision-ground and polished ram with exceptional repeatability and minimal friction. The entire linkage system rides on bearings and custom hardware, assembled by hand to near-zero slop—a level of precision you'll feel in every pull of the handle. Area419 machines each press in Ohio from American materials, and hand-fits the ram and bearing for the tightest tolerances in its class. The result is a ram stroke with less than 0.0005" repeatability variance when indexing the turret—the kind of consistency that matters when you're chasing tight groups.
Gen 2 refinements include a firmer bottom-of-stroke linkage that lets you cam-over and float the shellholder if you prefer, an even smoother stroke from first use onward, and ergonomic touches like a primer-tray detent and torque-tool storage slot built into the frame. The integrated primer-catch system slides out cleanly—no surgical tubing, no baby-food jars cluttering your workspace. The 4.75" opening accommodates cases up to .338 Lapua Magnum, and the 4.4" available ram stroke handles significantly large cartridges. Standard 7/8" dies fit without adapters; a separate turret head allows 1-1/4" die compatibility when needed.
Every ZERO Gen 2 ships with a bolt-down plate and the supplied T-handle for turret indexing. If you own Gen 1 accessories—press stands, trays, shellholders, or turrets—they work with Gen 2; just verify die seating adjustments due to the updated linkage geometry.
Key Features
- Custom PTFE-lined bearing system with precision-ground ram for repeatable, smooth strokes
- Hand-fitted ram and bearing for exceptionally tight tolerances and minimal friction
- Turret indexing repeatability of less than 0.0005"
- Firmer bottom-of-stroke linkage allows cam-over and floating shellholder techniques
- Integrated, slide-out primer-catch tray eliminates external jars and hoses
- 4.75" press opening and 4.4" ram stroke accommodate large cartridges up to .338 LM
- Oversized 0.75" steel arm and zero-friction knob for confident, smooth operation
- Zero-slop turret head with oversized ball-detent positioning system
- Accepts standard 7/8" dies and shellholders; optional turret for 1-1/4" dies
- Bearing-guided linkage throughout for efficient energy transfer and ergonomic feel
- Manufactured in Ohio from American materials by American workers
- Full Gen 1 accessory compatibility
Specifications
| Weight | 28 lbs |
| Dimensions | 22" × 15" × 10" |
| Turret Thread Size | 7/8" (Standard) |
| Press Opening | 4.75" |
| Available Ram Stroke | 4.4" |
| Turret Indexing Repeatability | Less than 0.0005" |
| Maximum Case Capacity | .338 Lapua Magnum |
| Included Accessories | Bolt-down plate, T-handle for turret indexing |
Frequently Asked Questions
Will my Gen 1 ZERO accessories work with the Gen 2 press?
Yes. Area419 designed Gen 2 for full backward compatibility with Gen 1 press stands, storage trays, shellholders, turrets, and other ZERO accessories. Note: due to the updated linkage, you may need to verify and adjust your die seating after installing Gen 1 turrets.
What size dies does the ZERO Gen 2 accept?
The press ships with a 7/8" turret head and accepts standard 7/8" threaded dies and shellholders. A separate turret head for 1-1/4" dies is available as an optional accessory, with no thread-stacking adapters required.
Can I use this press for large magnum cartridges like .338 Lapua?
The press opens to 4.75" and provides 4.4" of available ram stroke, accommodating cases up to .338 Lapua Magnum. For Cheytac-class reloading, depending on your die setup and bullet length, you may need to scoop the bullet into the seating die before completing the stroke.
How does the primer-catch system work?
The ZERO Gen 2 features an internally contained primer-catch tray that slides out cleanly from the press body. This eliminates the need for external surgical tubing or jars, keeping your reloading bench uncluttered and your workflow simple.
