Area 419 Zero M-Series Sizing Dies .22 Cm W/ Shell Holder
$500.00
The Area 419 Zero M-Series sizing die for .22 CM is engineered for reloaders who want match-grade brass preparation without unnecessary complexity. Built by the makers of the ZERO reloading press, this full-length sizing die combines precision engineering with practical usability—whether you're a meticulous long-range competitor or someone newer to handloading who wants reliable, repeatable results. The .22 CM version arrives ready to work, complete with a shell holder and all the essentials you need to start resizing.
What sets the M-Series apart is its thoughtful design philosophy: Area 419 engineered this die knowing it had to work harmoniously with their ZERO press, quality brass, and your rifle's chamber. The micrometer-adjustable headspace control lets you dial in precise shoulder bump without guesswork, and the full-length neck sizing keeps your fired cases consistent and reliable for subsequent rounds. A precision-ground expander mandrel (shipped with .002" neck tension) ensures your brass fits your rifle's chamber smoothly—no more sticky bolt after the second loading cycle.
Durability and serviceability matter here too. The die features a replaceable steel decap pin, spring-ejection for spent primers, and a reamer cut to exacting tolerances that actually achieve a true size. Hydraulic shoulder pressure relief protects your setup during operation. Everything is made in America, and Area 419 backs the package with a ZERO die ring, a spare decapping pin, and the installation tools you'll need.
One critical note: this is a 1¼″ die and requires a hybrid or 1¼″ turret on your ZERO press (or compatible 1¼″ press). It will not fit a 7/8″ turret or standard 7/8″ press.
Key Features
- Micrometer-adjustable headspace and shoulder bump for precision control
- Precision-ground expander mandrel with .002" neck tension (optional mandrel kits available)
- Full-length neck-to-extractor sizing for consistent case prep
- Spring-ejection system for spent primers
- Replaceable steel decapping pin for long-term serviceability
- Reamer cut to exacting dimensions for true sizing
- Hydraulic shoulder pressure relief
- Includes ZERO die ring, spare decap pin, and installation/removal tools
- 100% made in America
- Includes shell holder
Specifications
| Caliber | .22 CM |
| Die Type | Full-length sizing die |
| Die Size | 1¼" (requires 1¼" turret or hybrid turret) |
| Included Accessories | Shell holder, ZERO die ring, spare decapping pin, installation/removal tools |
| Expander Mandrel | Precision-ground; ships with .002" neck tension option |
| Decap Pin | Replaceable steel |
| Primer Ejection | Spring-ejection for spent primers |
| Shoulder Control | Micrometer-adjustable with hydraulic pressure relief |
| Country of Origin | USA |
Frequently Asked Questions
Will this die work with my reloading press?
The Area 419 Zero M-Series sizing die is a 1¼" die and requires either a hybrid turret or a 1¼" turret on your ZERO press or other compatible 1¼" press. It cannot be used with a standard 7/8" turret or 7/8" press. Verify your press and turret size before ordering.
What's included with this die?
Your purchase includes the sizing die, a shell holder, an Area 419 ZERO die ring, a spare decapping pin, and all necessary installation and removal tools. The die ships with an expander mandrel set to .002" neck tension; optional mandrel kits are available separately if you want different neck tension increments.
Can I adjust the shoulder bump on this die?
Yes. The M-Series features micrometer-adjustable headspace and shoulder bump control, allowing you to fine-tune your sizing to your specific rifle's chamber and reloading needs without trial and error.
What if the decapping pin wears out?
The decapping pin is replaceable, so you can service the die yourself as needed. Area 419 ships a spare pin with every die, and replacements are available separately.
