Apex Tactical Armorer's Tray & Pin Punch Kit - Model 104110, Red Polymer Pistol Maintenance Tool

The Apex Tactical Armorer's Tray & Pin Punch Kit is a red polymer pistol maintenance system designed to let you work on your handgun without marring the frame or losing critical components. Whether you're installing a new trigger, swapping strikers, or replacing the magazine disconnect, this kit gives you a dedicated work surface and the right tools for the job—engineered specifically for gunsmithing on modern polymer-frame pistols.

The armorer's block itself is the foundation. Pre-positioned bosses, slots, and holes hold pins and springs exactly where they need to be, so you're not fighting gravity or risking damage to function surfaces as you drive pins in and out. Thumb safeties and magazine disconnects drop into dedicated slots and stay put—no fumbling, no marring. The high-density polymer construction protects your frame from dents and scratches that steel blocks can leave behind. One side of the block is set up for .45 strikers; flip it over and the other side handles 9mm, .40, or .357 strikers. Retaining slots on each side make striker removal and spring installation straightforward. If you're swapping triggers, raised walls on the block cradle the trigger bar in exactly the right position.

The tooling plate attaches to the underside of the block and creates a raised, stable work platform. It's outfitted with snap locks and slots to keep a 1/8" custom roll pin punch and 1/16" allen wrench organized and within arm's reach. Rubber feet grip your work bench, preventing the whole assembly from sliding around mid-project. A ring magnet on the underside of the plate catches small steel parts—no more lost springs or detent balls rolling under the workbench.

This is the kit for serious shooters and gunsmiths who want to maintain and customize their pistols without sending them out. Apex Tactical's contact information is cast directly into the block for easy tech support access.

Key Features

• Pre-positioned bosses, slots, and holes protect critical surfaces while working
• High-density red polymer construction prevents frame marring
• Striker retaining slots for both .45 and 9/40/.357 strikers
• Dedicated slots for thumb safety and magazine disconnect work
• Raised trigger-bar positioning walls for easy trigger swaps
• Complete tooling plate system with snap-lock tool storage
• Includes 1/8" custom roll pin punch and 1/16" allen wrench
• Rubber feet for stable work surface grip
• Ring magnet to retain small steel parts
• Molded Apex contact info for tech support access

Specifications

Frequently Asked Questions

What pistols can I work on with this armorer's kit?

The kit is designed for M&P and Glock pistols. The block accommodates .45 strikers on one side and 9mm, .40 S&W, and .357 Sig strikers on the other, making it versatile across most modern polymer-frame service pistols in those calibers.

Will this block damage my pistol frame?

No. The high-density polymer construction is engineered to protect your frame from marring and dents. The pre-positioned bosses and slots also distribute work pressure away from critical function surfaces, keeping your frame safe during pin and spring work.

What tools are included in the kit?

The kit includes a 1/8" custom roll pin punch and a 1/16" allen wrench. Both tools store securely in the snap-lock slots built into the tooling plate.

Does the tooling plate stay attached, or can I remove it?

The tooling plate attaches to the underside of the armorer's block and is designed as part of the system. It provides the raised work surface and tool storage you need for efficient, organized pistol maintenance.