Volkswagen Atlas Cross Sport (2020-Current) Slimline II Roof Rail Rack Kit

Volkswagen Atlas Cross Sport (2020-Current) Slimline II Roof Rail Rack Kit - Premium Cargo Solution

Front Runner
SKU:
118634121
|
UPC:
6009542283760
|
MPN:
KRVA006T
$1,356.00
Current Stock:
Product Overview

This 1560mm/61.4" long, full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 4 Rail Grip Feet to mount the Slimline II Tray to the roof rails of your Volkswagen Atlas Cross Sport. This system installs easily with off-road tough feet that grip onto the existing factory/OEM roof rails. No drilling required.

All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.

NOTE: Your vehicle must be equipped with the factory/OEM roof rails in order to use this rack kit.

This rack kit can be removed leaving your vehicles roof and roof rails in their original condition.

All Front Runner Racks are backed by a Limited Lifetime Warranty*

Factory Rail Rack Kits are designed as a "light duty" cargo solution. Please refer to your vehicles owner manual for manufacturers recommended load rating and do not exceed these limits.

For optimal load carrying capacity, we recommend that there is no cargo overhang (excludes sports gear) and all weight is distributed evenly across the rack.

Factory Rail Rack Kits are not suited for extreme off-road conditions and therefore you should consider a different Front Runner mounting solution if this is your intended purpose.

Please contact us for advice on specific mounting solutions for your vehicle and use.

Note: The load for Factory Rail Rack Kits must not exceed 88lbs or 40kg, and ensure the load is distributed evenly.

Additional Information
KRVA006T - Volkswagen Atlas Cross Sport (2020-Current) Slimline II Roof Rail Rack Kit - by Front Runner




Consisting of:


2x GOFR001 - Rail Foot Base (Pair)
2x GOFR014 - Flush Rail Outer Grips / No. 6
2x GOFR035 - Flush Rail Inner Grips / F
3x RRAC904 - Plastic Spacer for Rail Foot Base / 10mm (Pair)
1x RRSTD08 - SLII Tray - 1255mm(W)X1560mm(L)



Material Used:

Black epoxy powder - coated T6 aluminium

High strength steel



Approximate Installed Weight: 53.95kg (118.94lbs)
Installation Instructions for KRVA006T (EN)
View / Download
Installation Instructions for GOFR001 (EN)
View / Download
Installation Instructions for RRSTD08 (EN)
View / Download
*A PDF viewer is required to view the fitting instructions.