BMW X3 (2013-Current) Slimline II Roof Rail Rack Kit - Heavy-Duty, Sleek Design

SKU:
118635123
|
UPC:
6009542260259
|
MPN:
KRBX003T
$1,067.00
Current Stock:

This 1156mm/45.5" long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 pairs of Rail Grip Feet to mount the Slimline II Tray to the roof rails of your BMW X3 (2013-Current). This system installs easily with off-road tough feet that grip onto the existing factory/OEM roof rails. No drilling required.

All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.

NOTE: Your vehicle must be equipped with the factory/OEM roof rails in order to use this rack kit.

This rack kit can be removed leaving your vehicles roof and roof rails in their original condition.

For a stronger expedition grade cargo carrying solution, Front Runner may offer a specific Foot Rail System to mount the Rack Tray to your vehicle. Front Runner Foot Rail solutions can be installed by removing the factory roof rails or used if no factory roof rails are fitted.

All Front Runner Racks are backed by a Limited Lifetime Warranty*

Factory Rail Rack Kits are designed as a "light duty" cargo solution. Please refer to your vehicles owner manual for manufacturers recommended load rating and do not exceed these limits.

For optimal load carrying capacity, we recommend that there is no cargo overhang (excludes sports gear) and all weight is distributed evenly across the rack.

Factory Rail Rack Kits are not suited for extreme off-road conditions and therefore you should consider a different Front Runner mounting solution if this is your intended purpose.

Please contact us for advice on specific mounting solutions for your vehicle and use.

Note: The load for Factory Rail Rack Kits must not exceed 88lbs or 40kg, and ensure the load is distributed evenly.

KRBX003T - BMW X3 (2013-Current) Slimline II Roof Rail Rack Kit - by Front Runner


Consisting of:


2 x GOFR001 - Rail Foot Base (Pair) - by Front Runner
2 x GOFR015 - Flush Rail Outer Grips / No. 7 - by Front Runner
2 x GOFR036 - Flush Rail Inner Grips / G - by Front Runner
1 x RRAC904 - Plastic Spacer for Rail Foot Base / 10mm (Pair)
1 x RRSTD06 - Slimline II Tray - 1255mm(W) X 1156mm(L) - by Front Runner



Material used:
*A PDF viewer is required to view the fitting instructions.